By Susu | 27 October 2020 | 0 Comments
Analysis of unresponsiveness of touch all-in-one machine
In the pace of modern economic development, interactive touch machines have also entered people's sight and have been widely used. We found that touch-sensitive machines lack tactile response during use. In this case, we need to understand some troubleshooting methods of the Touch-One machine in advance, so that we can deal with it urgently under special circumstances. So, what is the answer to the unresponsive touch screen?
Touch solution and machine failure analysis:
1. Check whether the hard disk is turned off in "Display power saving settings". The method is to right-click on the desktop, select the "Properties" command, and then select the "Screensaver" tab in the dialog box, click the "Settings" button, and set the parameter to "Open" Always", except for "Energy Plan" Except for "Never."
2. In some applications, due to the low performance of the ground connection, the control box shell is covered by a large amount of static electricity, which will affect the working electric field inside the control box and cause the contact to gradually fail. At this time, use a cable to ground the control box enclosure and reset it.
3. Since the integrated touch machine is covered by sound waves during operation, if it is not cleaned for a long time, too much dust will accumulate, blocking the reflected wave bar and making the integrated touch machine work normally. For the touch screen, please use a business card or a clean bill to gently wipe the dust on the surrounding reflector through the space between the front cover and the touch sensor unit, and then restart the computer. For the touch unit, please open the front cover of the monitor, wipe the dust on the reflective strip with a clean towel, and then restart the computer.
4. Many one-button machine control boxes use machine power instead of taking power from the host. Therefore, you should also check whether the 5V output of the power supply is correct. Sometimes the current is too large, which will cause the fuse to burn. Replace the fuse.
The above is about the non-contact reaction treatment method of the all-in-one touch machine. The so-called expensive wood cannot keep the result and will only rot, and the diamond will not shine cleanly. Even the quality of the all-in-one touch machine must follow the code for regular use and maintenance. Avoid malfunctions and deal with the touch unit in time.
Whatsapp/wechat:+8618102627416
Leave a Reply
Your email address will not be published.Required fields are marked. *