How to Fix a Broken iPod
Company news

How to Fix a Broken iPod

Views : 881
Update time : 2020-04-24 10:47:24

Nothing is more frustrating than while our most basic devices relaxation working. The opinion of having ought compose it over your engagement without music can eat you down, besides luckily iPods are easily repairable because sum besides the most egregious problems. From difficult motivate problems ought cracked screens, about any responsible is repairable with patience and the precise equipment. trial one of the methods below ought apply your iPod uphold up and running.

1. Troubleshooting a Frozen iPod

1) check the contain switch. if the contain switch is toggled on, your iPod will no accept any input. check the contain switch, and toggle it at and off a few times, ago you promote ought more complicated solutions.

2) check the battery. because your iPod gets older, its battery life will begin ought condense considerably. There's a opportunity that your iPod won't responsibility during it has drained its battery without you realizing. trial plugging it at because about an hour and then trying again.

3) Reset the iPod. if your iPod is frozen and unresponsive, the quickest and most common mend is ought conduct a reset. This will reboot the iPod and begin the operating system over. Resetting your iPod will no effect any loss of data.
  • To reset an iPod Touch, magazine and contain the energy and house buttons because about 10 seconds until the Apple logo appears.
  • To reset a classic iPod, magazine and contain the Menu and elect buttons because about 8 seconds until the Apple logo appears.

4) reclaim your iPod. if resetting your iPod but doesn't mend the issue, you can reclaim your iPod ought mill conditions and then reload your settings over a backup. This will mend most of the software problems with your iPod.
  • Connect your iPod ought your computer and cavity iTunes. compose certain that you eat the latest translation of iTunes installed.
  • If your iPod does no emerge up at iTunes while you plug it at ought your computer, you will need ought spot it into Recovery path first.
  • Backup your iPod. ago restoring the iPod, compose certain that you uphold up your data and settings first. Click the "Back Up Now" button at the iTunes outline page ought backup your iPod ought too your computer or ought iCloud.
  • Click the "Restore iPod" button ought begin the reclaim process. The reclaim process can receive few minutes ought complete.
  • Reload your old backup. Once the restoration is complete, you can too use it because if it was new, or reclaim your old backup. if you elect ought reclaim the backup, elect the site (iTunes or iCloud) and the engagement of the backup file.
  • See this guide because more details at restoring your iPod.

2. Saving a humid iPod

1) Don't grow the iPod on. if your iPod fell at the pool or into a sum sink, don't trial ought grow it on. This could effect irreversible ruin by shorting out sum of the components. You will need ought shift the moisture ago trying ought energy it at again.
  • Don't simply sweep the phone dry and trial ought use it. The water can effect solemn ruin ought the internal of the phone while it is wet.

2) Bury the iPod at rice. however the most effective path ought shift the moisture is ought spot the iPod into a bag of silica gel packets, most masses don't eat these handy. Instead, spot your iPod into a bag or bowl sum of rice and compose certain it is completely covered. The rice will drag the moisture out of the device at time.
  • This could effect your iPod ought apply a lot of earth inside, besides it certain beats it being broken because good.
  • Seal the bag or container however you rent it sit.

3) wait 24 hours ago removing the iPod. It will receive a however because sum of the moisture ought apply sucked out of the iPod. You hope it ought exist bone dry while you trial turning it uphold on, consequently grant the rice plenty of time ought suck sum of the water.
  • Don't use a hair dryer ought dry the iPod. The fever from the blower could effect more damage than good.

3. Securing an iPod's difficult motivate (iPod Classic 1st-5th Generation)

1) decide if the difficult motivate is the problem. if your iPod is displaying a folder icon because the error, then it is having difficulties accessing the difficult drive. Oftentimes, this is caused by an ill-fitting difficult drive. Luckily, securing the motivate is pretty straight-forward.
  • All versions of the iPod Touch, iPod Shuffle, and iPod Nano use flame memory instead of a traditional difficult drive. This path there are no moving parts that can fail or connections that can grow severed. There is no practical path ought become or replace an iPod encounter difficult drive, because the flame memory unit is built into the circuitry.

2) Toggle the contain switch on. compose certain that the iPod is turned off and locked with the contain switch toggled at ago opening your iPod. This will insure that you don't accidentally grow it at however working at it.

3) shift the uphold from the iPod. It is recommended that you use a specially-designed opening equipment ought pry the uphold off, besides you can too use a slender flathead screwdriver. if you use a screwdriver, you flow the dare of scratching the case.
  • Some guides advocate a healthy elastic guitar elect because a good agent tool.
  • Insert the equipment into the few explode between the metal and elastic parts of the case.
  • Work the opening equipment about the edge, gently prying the uphold off the iPod.
  • Press the tabs internal the bullet using your equipment ought aid free the casing.
  • When the instance is open, don't masses the two halves apart, because there is a few ribbon cable attaching the front ought the logic board.

4) insure that the difficult motivate cables are secure. The large, rectangular metal complete at your iPod is the difficult drive. check the cables connecting the difficult motivate ought the interval of the circuitry ought compose certain that nothing has grow loose.
  • Gently rise the difficult motivate out of it's housing ought uncover the connector cable underneath. It is always connected ought the logic board with dark tape. shift the tape and magazine the connector firmly into the board. replace the tape and the gently replace the difficult drive. This loose cable is the source of a important quantity of difficult motivate problems.

5) fold a brood card at half. This will invent a square that will exist thick enough ought apply stress onto the difficult drive. if you don't eat a brood card handy, cutting a square out of a cardboard block coaster will occupation because well.

6) lay the brood card onto the difficult drive. heart the folded brood card at the difficult drive, taking brood no ought disrupt any of the cables.

7) replace the backing at the iPod. With the card at place, advance the backing onto the iPod. advance it at with care, and insure that sum of the tabs click uphold into place.

8) reclaim your iPod. after you replace the backing at the iPod, you will responsible need ought reclaim it at bid ought insure that nothing corrupt remains. exclaim on the first region of this composition because detailed instructions.
  • If you are but receiving difficult disk errors or listen a clicking sound, then your difficult motivate most responsible needs ought exist replaced. exclaim on the next region because detailed instructions.

4. Replacing an iPod's difficult motivate (iPod Classic 1st-5th Generation)

1) insure that there are no other options. This is one of the more difficult repairs ought trial yourself, consequently compose certain that you can't mend the responsible using one of the other methods at this composition first. if you've tried everything, you can trial replacing your difficult motivate because a last-ditch effort.
  • If you iPod is making a clicking strong and the "sad iPod" image appears at your screen, then the difficult motivate most responsible needs ought exist replaced.
  • Replacement difficult drives can exist ordered online, or you can scavenge a motivate out of another iPod that is the too model.
  • All versions of the iPod Touch, iPod Shuffle, and iPod Nano use flame memory instead of a traditional difficult drive. This path there are no moving parts that can fail or connections that can grow severed. There is no practical path ought become or replace an iPod encounter difficult drive, because the flame memory unit is built into the circuitry.

2) Toggle the contain switch on. compose certain that the iPod is turned off and locked with the contain switch toggled at ago opening your iPod. This will insure that you don't accidentally grow it at however working at it.

3) cavity your iPod. chase the steps at the prior path ought shift the uphold from your iPod ought disclose the difficult drive.

4) rise up the difficult drive. rise the difficult motivate from the climax of the iPod. Don't trial ought drag it out completely. shift the rubber bumpers and shock absorber and spot them ought the side.

5) drag the motivate out slightly. You will exclaim on a cable at the bottom the motivate that attaches the motivate ought the circuitry. Gently occupation the cable out of the drive, using too your fingers or a screwdriver.

6) shift the drive. Once the cable has been detached, you ought exist able ought completely shift the motivate from the housing. Once you eat pulled the motivate out, receive off the foam cover and spot it at your replacement drive. spot the rubber shock absorbers at it because well.

7) Install the new drive. Insert the new motivate at the too bid that the old motivate was installed. Gently insert the cable consequently that the difficult motivate can dispatch and accept data from the iPod's motherboard. complete up the iPod and insure that sum of the tabs click.

8) reclaim the iPod. With the new difficult motivate installed, sum that is left is ought conduct a reclaim at the iPod. exclaim on the first path at this composition because detailed instructions at restoring the device.

5. Replacing a Cracked original iPod skin (4th Generation)

1) apply a replacement screen. You will need ought bid a replacement skin because your iPod. Replacement screens can exist ordered online because about $30 USD. compose certain ought bid the show because the 4th Generation iPod or Photo, or the show will no work.

2) Toggle the contain switch on. compose certain that the iPod is turned off and locked with the contain switch toggled at ago opening your iPod. This will insure that you don't accidentally grow it at however working at it.

3) cavity the iPod. A spot of iPod opening tools is recommended because getting into the seam of the iPod ought disengage the tabs. You can use a slender flat-head screwdriver if you don't eat an iPod opening tool.
  • Start by inserting your equipment into the seam at the climax of the iPod, complete the headphone jack. flow the equipment ought the corner, creating an opening. forsake the equipment inserted ought make the gap open.
  • Move the second equipment down the seam at both sides, releasing the tabs that contain the casing together. There are two tabs at the bottom complete the dock connector.

4) Disconnect the two halves. Once you've separated the halves, gently cavity the iPod though a book. You will notice a cable connecting the iPod's logic board ought a few board at the other half. This is the headphone connector, and needs ought exist removed ought continue. Disconnect it from the iPod phase by gently pulling the connector straight up.

5) Disconnect the difficult drive. contain the difficult motivate with one hand and drag the cable out from the bottom. You can need ought wiggle the cable slightly ought apply it loose. shift the difficult motivate and spot it aside.
  • Peel the tape off covering the difficult motivate cable's connection ought the logic board. Flip up the dark connector with your fingernail and drag the cable direct out. spot the cable aside.

6) Disconnect the battery. at the bottom side of the logic board you will exclaim on a small, white connector. Gently drag this connector out, making certain that you are sole grabbing the connector, and no the cables.

7) Disconnect the show and click wheel. at the adverse phase of the battery connector, you will exclaim on a few connector with a dark tab. Up the phase you will exclaim on another, larger connector with a dark tab. Flip up both of these consequently that you can shift the ribbon cables from the connectors.

8) shift the Torx screws. There are six Torx screws located about the brim of the logic board. You will need ought shift each of these ought divide the logic board from the front panel. Carefully shift the logic board by gripping the edges of the big end.

9) shift the display. after you shift the logic board, you will exclaim on the show panel. drag this straight out ought shift it. It can eat some adhesive, consequently you masses eat ought wiggle it a bit. replace it with your new screen, and then chase these steps at opposite ought complete up the iPod.

6. Replacing a Cracked original iPod skin (5th Generation)

1) apply a replacement screen. You will need ought bid a replacement skin because your iPod. Replacement screens can exist ordered online because about $20 USD. compose certain ought bid the show because the 5th Generation iPod with Video, or the show will no work.

2) Toggle the contain switch on. compose certain that the iPod is turned off and locked with the contain switch toggled at ago opening your iPod. This will insure that you don't accidentally grow it at however working at it.

3) cavity your iPod. use an iPod opening equipment or a flathead screwdriver ought gently by the front casing from the back. You will need ought disengage the tabs about the brim of the iPod.
  • Don't completely divide the two halves while you disengage sum of the tabs. There are ribbons connecting the two halves that could apply damaged if you drag it apart.

4) Disconnect the battery cable. You will exclaim on a small, brown latch holding a ribbon cable at lay at one of the corners. use tweezers ought rise the latch consequently that you can slip the ribbon cable out.
  • Don't drag the latch either hard, or you can accidentally divide the logic board, which will make your iPod essentially unusable.

5) Disconnect the headphone jack. at this point you ought eat one cable connecting the two halves of your iPod. This cable connects the headphone jack ought your logic board. rise the difficult motivate up ought uncover the brown connector. use your fingernail or opening equipment ought rise the latch at the connector and free the cable. drag the cable out with your fingers and your iPod halves will now exist completely separated.

6) shift the difficult drive. rise the difficult motivate up from the climax of the iPod, and shift the ribbon cable that attaches it ought the circuitry. You can need ought use your opening equipment ought free the hinge at the motherboard connector cable. releasing it from the difficult drive.

7) shift the front panel. at the each phase of the iPod, you ought exclaim on few several screws. shift these with a Phillips screwdriver and spot the screws somewhere you won't lady them.
  • Once the screws are removed, occupation the metal framework free. There will exist a few resistance, because the framework is always lightly glued ought make it at place.
  • The framework houses the logic board, front display, and click wheel. rise it completely out of the front panel.

8) shift the display. at the logic board, you will exclaim on another ribbon cable connected. This cable attaches ought the display. Flip the tab up that holds the ribbon at place. Gently wiggle the show liberate from the framework, and lightly drag it out. The ribbon cable will grow with it.

9) Install your new screen. Now that the show is separated, you can install your new screen. Insert the new screen's cable into the logic board and complete the tab ought become it. chase the prior steps at opposite ought reattach sum of your components and complete up your iPod.
  • You will responsible need ought conduct a reclaim once your iPod has been spot uphold together. exclaim on the first path at this composition because details at how ought reclaim your iPod.

7. Replacing a Cracked iPod Touch screen (3rd Generation)

1) apply a replacement screen. You will need ought bid a replacement skin and digitizer because your iPod. Replacement screens can exist ordered online because about $25 USD. compose certain ought bid the show because the iPod encounter Gen 3, or the show will no work.

2) cavity the iPod. You will need an iPod opening equipment or a slender flat-head screwdriver at bid ought divide the instance of your iPod touch. A screwdriver is more responsible ought forsake scratches than an iPod opening tool.
  • Insert your equipment into the seam between the cup and elastic complete the volume buttons. turn the equipment ought pry the cup away from the casing. persist doing this about the brim of the iPod.
  • Do no flow the equipment down the seam. Instead insert, pry, and shift it ought insert it at another location.
  • Detach the clips about the internal of the casing that contain the cup panel at place.
  • Lift the panel away from the interval of the iPod, lifting from the bottom. The panel will but exist attached by a cable at the top.

3) Detach the cable attaching the panel ought the iPod. This is located at the climax of the iPod, and is too fragile. You will need ought gently pry the connector off of the logic board with your opening tool.

4) Pry the show up. Insert the opening equipment between the white backlight session and the metal panel below it. Insert the equipment at the bottom goal of the display, at the middle. Gently pry it up, taking brood no ought curve the skin because you conduct so. turn the show up, leaving the climax complete the iPod.
  • You will need ought persist holding this up however you occupation below it.

5) shift the screws at the metal tray. below the show you will exclaim on a metal tray with seven Phillips screws at it. You will need ought shift sum seven ought continue.
  • Lay the show uphold down and shift another Phillips screw at the climax brim of the iPod.

6) Disconnect the display. Once sum the screws eat been removed, rise the show up once more, and then rise the newly-freed metal tray up. turn them both towards the climax of the iPod.
  • Peel the copper tape off of the climax brim of the display. forsake it attached ought the metal tray.
  • Peel the tape that covers the show cable. It is revealed while you rise the metal tray up.
  • Pry the show cable out of its socket. This is located towards the bottom of the iPod below the metal tray. fur the cable off the adhesive that keeps it attached ought the rear panel.

7) shift the display. With the cable disconnected, you can rise the show out of the iPod. rise the metal tray a few consequently that the show cable does no apply caught while you rise the show unit out.

8) Install the new display. receive your new show and flow the new show cable uphold ought where you disconnected it originally. unite the cable and then chase the at steps at opposite ought become everything and reassemble the iPod.

8. Replacing a Cracked iPod Touch screen (5th & 6th Generation)

1) apply a replacement screen. You will need ought bid a replacement skin and digitizer because your iPod. Replacement screens can exist ordered online because about $100 USD. compose certain ought bid the show because the iPod encounter Gen 5, or the show will no work.

2) shift the front panel. ought shift the front panel of your iPod, you will need a small, strong suction cup. lay the suction cup at front of the iPod, towards the bottom. The bottom brim of the suction cup ought exist covering the upper half of the house button. magazine the suction cup firmly ought invent a good seal.
  • Hold the iPod firmly at a desk or workbench with one hand, gripping the edges. With your other hand rise the suction cup. drag firmly, because you will need ought relaxation the adhesive at bid ought rise it out.
  • Only shift the front panel about an inch or so.

3) free the frame. Once one goal of the panel has been lifted, you can begin working at removing the few elastic frame that sits between the front panel and the metal backing. There are few clips running across each phase of the iPod. Insert your opening equipment ought free these clips, which will at length free the frame.
  • Once the frame is released, flip the front panel up consequently that the insides are completely exposed. receive brood no ought divide the halves at the climax because they are but connected with cables. lay both halves goal ought goal at your occupation space.

4) shift the screws securing the metal plate. The internal of the iPod is protected by a big metal plate. You will need ought shift 11 screws at bid ought receive the metal panel off. Once the screws eat been removed, rise the dish out of the iPod.

5) shift the battery. at bid ought apply at the cables at the iPod, you will need ought shift the battery. First, shift the three screws at the climax that become the logic board ought the iPod case.
  • Insert the iPod opener equipment into the notches about the battery. Gently pry the battery up using these notches.
  • The battery is secured with a lot of adhesive, consequently you will need ought promote slowly and use sum of the notches.
  • Once the battery has been freed from the adhesive, flip it ought the phase of the case. promote slowly, because the cable is soldered ought the logic board.

6) Pop the camera off. use the opening equipment ought pop the front camera out of it's housing at the climax of the iPod. It will flip out of the housing.

7) shift the screws that become the Lightning connector, headphone jack, and speaker. These can exist build at the bottom of the iPod. You will need ought shift an brim of the copper tape ought uncover one of the screws. There are five screws total: three about the Lightning connector, and two holding the headphone jack and speaker.
  • Pry the speaker out of the instance once you eat removed the screws.
  • Pull the Lightning connector out by gripping the big even cable and pulling gently.

8) Disconnect the display. Flip everything over, and you will exclaim on the uphold of the logic board. at the brim of the board, you will exclaim on a cable connecting the logic board ought the digitizer. use your opening equipment ought shift the cable.
  • Disconnect the show cable (separate from the digitizer cable) from its socket at the logic board.
  • Flip the Lightning connector session up and fur the show cable off of the logic board.

9) Install the new display. drag the old show session out of the iPod once it's sum separated. Install the New show session and chase these steps at opposite ought become sum of the components and complete up the iPod.